You are viewing a read-only archive of the Blogs.Harvard network. Learn more.
Skip to content

Automating Zone creation in OpenSolaris 2009.06

With the announcement of OpenSolaris 2009.06 I thought it would be appropriate to blog a little about a tool I had been writing to help myself play with Zones a bit easier.

My overall goals were the following:

  • Have each zone configured with its own virtual NIC (Crossbow)
  • Allow easy creation of zones without having to type zonecfg crap over and over again
  • Make it a stepping stone to automatically creating zones
  • See how well ipkg branded Zones work
  • Allow a Zone to get its IP and DNS configuration from DHCP

I had tried going through tutorials that I found on the web (See references below) for setting up Zones but sadly none of them worked to my frustration. After a lot of experimentation I finally pieced together a way to create zones quickly and (almost) automatically for simple configurations.


  1. Create a template zone that will be used as the main clone Zone
  2. Download and modify lines 34-35 to match the name of your template zone and the real interface you want the zones to bind to
  3. Download the DHCP event hook script from here and name it if you want DHCP configuration
  4. Run setup-zone-exclusive with the zonename and the virtual nic interface that you want

In more detail here are the steps below

First create a template zone (I call it barebones here)

# Create /zones as its own ZFS filesystem
$ pfexec zfs create rpool/zones
$ pfexec zfs set mountpoint=/zones rpool/zones
$ pfexec zfs create rpool/zones/barebones
$ pfexec chmod 0700 /zones/barebones
$ pfexec dladm create-vnic -l $REAL_IF vnic0
$ pfexec zonecfg -z barebones
barebones: No such zone configured
Use ‘create’ to begin configuring a new zone.
zonecfg:barebones> create
zonecfg:barebones> set zonepath=/zones/barebones
zonecfg:barebones> set ip-type=exclusive
zonecfg:barebones> add net
zonecfg:barebones:net> set physical=vnic0
zonecfg:barebones:net> end
zonecfg:barebones> exit

$ pfexec zoneadm -z barebones install

Get the script

I would suggest you create a project directory to hold things such as zonecreations.

Download from Github gists here. Name it Don’t forget to chmod +x the file so you can execute it

Download the DHCP event hook script

You can get that here. Make sure this script is in the same directory as wherever you saved

Create a zone

You can now create zones like this:

cd zonecreations
pfexec ./ mycoolnewzone virtualnic1

Have fun!

Update: Fixed an error in the example for using dladm. It should be correct now. Thanks!


Downloads (
A DHCP event script to make sure DNS is configured when DHCP acquires an IP

Older docs on setting up Zones on Solaris

How to use sysidcfg file in OpenSolaris 2008.11
Internal Zone Configuration docs
Performing the Initial Zone configuration
Preconfiguring with sysidcfg file
OpenSolaris FAQ on sysidcfg
Ben Rockwood’s blogpost on Zone creation

Helpful for understanding Zones and Crossbow

Crossbow on vnics

Finding out that there is a change in policy for setting root_password in sysidcfg files

PASSREQ is enforced
zlogin failure after zone setup

The following helped in understanding the role of IPS and ipkg inside a non-global Zone

Updating Zones in OpenSolaris 2008.x
A field guide to Zones in OpenSolaris 2008.05
OpenSolaris forum on sysidcfg and Zones

Be Sociable, Share!